This is a LED Arcade Game DIY Parts for 2 Player DIY Project.
The encoder support all the windows systems!
All the buttons are not metal.
If the LED does not light. Then please exchange the location LED interface.
Each player has its own USB cable to make sure that Multiplayer can play the games in the same condition!
The Joystick is a 8 way professional joystick!
The buttons are 5V Chrome LED Illuminated push buttons with build-in Microswitches inside.
The default buttons as lighted all the time.
If you purchase one of this items, what will included in the package
2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
2x 5Pin 8 way joystick
1x 1 Player 30MM 5V LED Chrome Push Buttons (White) With LED Lamp and Micro Switch
1x 2 Player 30MM 5V LED Chrome Push Buttons (White) With LED Lamp and Micro Switch
2x Coin 30MM 5V LED Chrome Push Buttons (White) With LED Lamp and Micro Switch
16x 30MM 5V LED Chrome Push Buttons With LED and Micro Switch
1x Instructions
Tips for installation
1. Plese read our user manual before starting your diy actions.
2. It's very important! Connect Joystick's 5Pin cable to the 5Pin slot that opposite the USB-B terminal. A lot people connect the joystick to the wrong 5Pin slot.
3. There is no need separate the button's functions when you connect wire to push buttons and encoder board exept you want add " Auto-Fire", " Tubro", "Clear" & " Mode" Functions. All the fight button functions can be set in MAME or RetroPie. "Auto-Fire", "Tubro","Clear" & "Mode" Functions have its own slot on the encoder board.
4. For Professional Players. We suggest your change all the buttons and joysticks into SANWA Brand or SEIMITSU Brand.
Tips for New User:
1. The item need work with MAME emulator. So before your build your own project, please download one to work with the parts.
2. If you use this kit to build your own Raspberry Pi Retropie Projects. Please search the steps before your DIY.
Button wiring method
Please note:
LEDs distinguish between positive and negative.
If the LED is not lit. Please replace the LED cable interface location.
However, pay attention to the direction of the LEDs. When connected, I inverted 75% of the LEDs that were installed upside down.
Everything is fine by removing them and turning them over.
Arcade Joystick
|
|
|
Can replace the different ball
| Joystick bottom
| Specification map
|
Chrome Arcade Buttons
|
|
|
1 Player 2 Player + 2x Coin Buttons
| Chrome led Arcade Buttons
| Specification map
|
Arcade Controller
|
|
|
|
|
|
