TheCandyJam

Description: 

FEATURES

- Supports CGA/EGA/YUV signal input.

- Supports VGA output 640*480,800*600,1024*768,1360*768

- CGA/EGA signal auto scan (15K,24K,31K)

- YUV signal auto scan (480i,576i,720i,1080i,480p,576p,720p,1080p)

- Chinese and English OSD.

- Supports position control & zoom control.

- True digital 24-bit A/D converter for true 16.7-million color conversion.

- Supports all VGA monitor (CRT、LCD、PDP、PROJECT……)

SPECIFICATIONS

MENU CONTROL

- “MENU” open OSD menu, and enter.

- “UP”    up and increase.

- “DOWN/AUTO” down and reduce.

Press this key: auto scan CGA/EGA signal

Press this key over 5 second and release: reset system

** (this operation is invalid when you open OSD menu)

-   “SW”    switch input signal Ypbpr/RGBS/RGBHV.

** (this operation is invalid when you open OSD menu)

- “Clamp sp” & “Clamp” please don’t adjust this button, except the monitor has black item or picture discoloration.

- For more functions control, please look at OSD to operate.

FAQ

No signal on you monitor

-please check the input and output cables, make sure all cables are connected. And make sure power is on.

The monitor says “No signal” 

-please press “SW” to switch input signal.

Input not supports

   -when your monitor displays “input not supports”, maybe you need change to low resolution.

Please press “DOWN/AUTO” over 5 second and release. Reset resolution to 800*600.

Image not full on you screen

   -please enter menu to adjust image position and zoom.

Image shake or freeze

   -please press “DOWN/AUTO”, system will auto scan input signal and restore image.

Have black item on screen, or all screen too black, or picture discoloration

   -please adjust “Clamp sp” and “Clamp st”, please keep “Clamp st” less than “Clamp sp”.

   -we suggest “Clamp st” SET “03” , “Clamp sp” SET “04”.

Image color not right            

-please adjust R\G\B VR.

Packing list :

1× Converter Board HD9800

1× Connection Cable

Installation and Attention:

1.    The LCD controller board input power voltage must be 12Vdc (except some boards which have marked need to use 5Vdc), the power current is recommended to be 2A or greater than 2A. If you not sure, please confirm on the purchase link page, or confirm with the seller. (Important: If using a wrong power adapter, the board maybe be burned, so please take care of this.)

2.    Don’t change the controller board settings, all boards have been set with compatible firmware and the right setting, and signal cable already has been connected on the board. ( The signal cable connector pin on board which has a mark is Pin1.)

3.    Refer to the purchase link picture to connect the cables. (Important: If connect with the wrong direction, sometimes may damage the LCD, so please take care of this.) Before powering on, confirm whether the signal cable between the LCD screen and the controller board is connected to the right pin, and confirm whether the screen backlight cable is connected to the inverter board (booster board).

4.    After the right connecting, before powering the board, check the board not touch the panel backside of the LCD or other conductive substance which may lead the board short condition.  Then input the power and input the signal source at the same time, the screen and controller board will work normally.

5.    If you have any other questions or problems which you can’t solve with following “Trouble analysis and shooting”, please feel free to contact with us before leaving a feedback or give a dispute, we will reply to you in 24hours to solve the problem or refund to you if it can’t be fixed.

6.   When you contact us, please provide the next information by photos for us to analysis:

A. Your screen type name. (Take a photo of the screen backside label)

B. Your all connecting condition, especially for signal cable to the panel connector. (Take photos of them.)

C. Your power adapter spec. (Take a photo of power adapter spec. label)

7.   When you return one product to the warehouse, it sometimes means throw away it. The probability of being recycled is very, very low. So in order to protect our environment, we hope you can take time to analysis or contact the seller before you return this product. Thanks a lot.

8.   Hope you can get a useful product, and give us positive feedback, thanks.

• We provide the payment methods of T/T, HSBC, Paypal, Western Union.

• The items will be delivered in 3 working days except holiday.

• It is very important for you to comfirm the address and phone number of your order.You can change the address before you contact us.

• The shipping by the Aliexpress Air Freight will arrive in 15-60 days. If you need the product urgently, it is possible to send by express shipping. 

  
  

Maybe you will meet the situation as below:

•  If you don't received the items in 15-60 days, please check the tracking number or contact us.

• Any operation problems, We can provide the wireless technology support in working time.

• If the goods broken during the shipping, please contact us after received the goods, we will resend or refund you.

• One year warranty from the day the product sold. Some technical issue can be solved online.

• Good feedback is very crucial for us. Please leave a positive feedback,if you satisfied with our products and service.Thanks!

  

VS DISPLAY TECHNOLOGY(SEHNZHEN) LTD is a Hi-tech manufacturer of liquid crystal displayer.It is establishiment in 1998.The headquarters is located in Shenzhen.

The products include LCD Panel of TN, HTN, STN, FSTN, CSTN; LCM of COB, COG, TAB, COF; Some Accessories like Backlight, Touch Panel and finish product--Digital Photo Frame. Those product use in a broad range of applications : in telecommunication, GPS, electronic medication, video and audio system, apparatus and meters, home appliances, personal digital assistant (PDA),  mobile phones, scientific instruments and other electronic appliances. We have won the great reputation both at home and abroad.VS DISPLAY has supplied one-stop service from OEM, ODM product to after service. From conceptual design to mass product, we have been specialized in this field for more than ten years. Our effective engineer will cater for you to design a product that meets all you demands and provide overseas technical support by wire.All products are directly exported to Europe, North, Asia, South-American and so on. On using equipment from Japan and USA, enchancing in-house manufacturing capability to keep down production cost, and getting high-quality products. As a result, we have earned an excellent reputation in the overseas market.Fabrication base covers 4,000sq meters. 2 COB lines, 1 COG lines, 1 TAB lines,QC system: ISO9001

Brand:VSDISPLAY  CLASS 9:Adapter plugs; Alarm monitoring systems; Blank integrated circuit cards; Computer peripheral devices;DVD players;Electric control panels;Electric luminesecent display panels; Electronic notice board;Integrated circuits;Laptop computers; LCD monitors for security pruposes;Portable media players; Power adapters; Printed circuit boards(PCBs);Protective films adapted for computer screens; Smart watches;Tablet computers;Video monitors; Video screens; Video telephones.

Exhibition: